Lobie FAQ

Will Lobies fit over my earbuds?

  Lobies are compatible with most earbuds. Take a look at about Lobies & Earbuds for an earbud matching guide.

Will Lobies fit my ears?

  Lobie is size adaptable for both small and large ears.
To fit small ears, twist or coil lobie as shown and hold for approximately 10 seconds. Twist more or less to obtain the ideal size.
Earbud Covers
To fit large ears, straighten & slightly stretch lobie and hold for approximately 10 seconds. Stretch more or less to obtain the ideal size.
Earbud Covers

How do I install earbuds into my Lobie?

 
Installing an earbud is easy. Locate the earbud for your “right” ear & the lobie
containing the “lobie” logo. These go together. The left lobie has an “L” on the inside. Next, align stem of earbud with the stem receiver on lobie and speaker with hole in lobie.
Earbud CoversEarbud Covers
With earbud stem aligned & resting in stem receiver, place both thumbs on the earbud speaker beside the stem with index fingers placed on the inside of the lobie as shown. Gently push and guide the earbud speaker into the lobie speaker hole. Do not force into hole. Proper installation should look similar to the illustrations below right. Now repeat for the left lobie.
Earbud CoversEarbud CoversEarbud Covers
It is easy to put lobie on one handed but you may want to start by trying two hands. Simply wrap the lobie loop around the back of your ear while holding the lobe portion against your ear as shown. Make adjustments to lobie’s placement around your ear to obtain maximum comfort. You can twist the lobe portion out or in to increase or decrease the angle or distance of the speaker from your ear canal. Now, plug in your audio and enjoy in comfort! Earbud Covers

Can I adjust or remove an earbud?

 
Earbuds can easily be removed. To remove an earbud from lobie, place both thumbs on the edges of the earbud speaker as illustrated. Apply gentle pressure as you push the earbud speaker out through the lobie speaker hole from which it was installed. Be careful not to grasp the earbud stem to adjust the placement, alignment or rotation of an earbud within the lobie. Do not attempt to remove an earbud by pulling on the stem or cord. Doing so might permanently damage the earbud.
Earbud Covers